Structural bolt pretension and torque
AISC minimum pretension for A325 and A490 bolts, and the torque estimate to reach it from T = K × D × P.
Structural bolt pretension and torque
| Diameter | A325 pretension (kN) | A325 torque (N·m) | A490 pretension (kN) | A490 torque (N·m) |
|---|---|---|---|---|
| 12.7 mm (1/2") | 53 | 136 | 67 | 169 |
| 15.88 mm (5/8") | 85 | 268 | 107 | 339 |
| 19.05 mm (3/4") | 125 | 475 | 156 | 593 |
| 22.22 mm (7/8") | 173 | 771 | 218 | 969 |
| 25.4 mm (1") | 227 | 1,152 | 285 | 1,446 |
| 28.58 mm (1-1/8") | 249 | 1,424 | 356 | 2,034 |
| 31.75 mm (1-1/4") | 316 | 2,005 | 454 | 2,881 |
| 34.93 mm (1-3/8") | 378 | 2,641 | 538 | 3,760 |
| 38.1 mm (1-1/2") | 458 | 3,491 | 658 | 5,017 |
Torque is a poor proxy for tension: the nut factor K varies with lubrication, coating and thread condition. Structural joints should be tightened by turn-of-nut, calibrated wrench, twist-off bolts or DTI washers as the specification requires. For other grades and a custom K use the torque and preload calculator.
Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.
Ready to get a quotation?
Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.