ASTM A563 / A563M: Carbon and Alloy Steel Nuts
The nut standard for structural and general bolting. A nut must be strong enough to carry its bolt to full strength without stripping.
What it covers
- Grades A, B, C, C3, D, DH and DH3
- Hex and heavy hex styles
- Inch and metric (A563M) versions
| Bolt | Matching nut | Style |
|---|---|---|
| ASTM A307 Grade A / B | A563 Grade A | Hex (heavy hex optional) |
| ASTM F1554 Grade 36 | A563 Grade A | Hex or heavy hex |
| ASTM F1554 Grade 55 | A563 Grade A (heavy hex); B or C where specified | Heavy hex |
| ASTM F1554 Grade 105 | A563 Grade DH | Heavy hex |
| ASTM F3125 A325 | A563 Grade C, C3, DH or DH3 | Heavy hex |
| ASTM F3125 A490 | A563 Grade DH or DH3 | Heavy hex |
| ASTM A449 | A563 Grade C or DH | Heavy hex |
| ASTM A354 Grade BD | A563 Grade DH | Heavy hex |
| SAE J429 Grade 5 / Grade 8 | A563 Grade C / DH (or SAE J995) | Hex |
Notes for specifiers
- Grade DH is the standard high-strength nut; DH3 is its weathering-steel counterpart.
- Galvanized nuts are tapped oversize before coating so they run onto galvanized bolt threads. An un-overtapped nut will not fit; a plain nut on a galvanized bolt loses the engagement the standard assumes.
- Galvanized A563 nuts for A325 / A490 bolts are also lubricated so installation torque is predictable.
- These pairings are typical. The project specification governs when it names a different grade.
Example specification wording
Nuts: ASTM A563 Grade DH heavy hex, hot-dip galvanized to ASTM F2329 and overtapped, lubricated.
Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.