ASTM A194 / A194M: Carbon, Alloy and Martensitic Stainless Steel Nuts for High-Pressure or High-Temperature Service
The nut standard that pairs with A193 and A320 bolting in pressure and high-temperature service.
What it covers
- Grades 1, 2, 2H, 2HM, 4, 7, 8, 8M and others
- Heavy hex nuts for flanged and pressure joints
| Bolting | A194 nut grade |
|---|---|
| A193 B7 | 2H |
| A193 B7M | 2HM or 7 |
| A193 B16 | 4 |
| A193 B8 | 8 |
| A193 B8M | 8M |
| A320 L7 | 4 or 7 (impact tested) |
Notes for specifiers
- 2H is also commonly used on F1554 Grade 105 and other high-strength anchor rods.
- Galvanized nuts must be overtapped before coating, as for A563.
Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.