Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Bolts & rods

ASTM A193 / A193M

Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service

ASTM A193 / A193M: Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service

Pressure-vessel and flange bolting. Grade B7 is the workhorse; B8 and B8M are the austenitic stainless grades.

What it covers

  • Grades B5, B6, B7, B7M, B16 (ferritic alloy) and B8 family (austenitic stainless)
  • Studs, bolts and threaded rod
  • Inch and metric (A193M) versions

Mechanical requirements (selected grades)

GradeSizeTensile (min)Yield (min)Elong. % minRA % minHardnessNotes
B7to 2-1/2 in.860 MPa125 ksi720 MPa105 ksi165035 HRC max
B72-1/2 – 4 in.795 MPa115 ksi655 MPa95 ksi1650
B74 – 7 in.690 MPa100 ksi515 MPa75 ksi1850
B7Mto 4 in.690 MPa100 ksi550 MPa80 ksi1850235 HBW maxSofter; for sour service.
B8 Class 1 (304)515 MPa75 ksi205 MPa30 ksi3050Carbide solution treated.
B8M Class 1 (316)515 MPa75 ksi205 MPa30 ksi3050Carbide solution treated.

A193 / A193M publish SI values; the metric figures shown follow the standard's SI table.

Matching hardware and finishing

B7
ASTM A194 Grade 2H
B7M
ASTM A194 Grade 2HM or 7
B16
ASTM A194 Grade 4
B8 / B8M
ASTM A194 Grade 8 / 8M

Notes for specifiers

  • B7 is chromium-molybdenum steel (AISI 4140 / 4142 family), quenched and tempered. It is also widely used for high-strength anchor rods and general heavy bolting.
  • Stainless grades come in classes; Class 2 (strain hardened) is stronger than Class 1 but varies by diameter. State the class.
  • Flange bolting is commonly specified with 8-UN threads for diameters over 1 in.

Example specification wording

Studs / rods: ASTM A193 Grade B7, 8-UN threads, hot-dip galvanized to ASTM F2329. Nuts: ASTM A194 Grade 2H, galvanized and overtapped.

Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.

Specifying this and want it checked?

Send the clause or the drawing note. We will confirm what it requires and whether we can supply it.