ISO 3506-1: Corrosion-Resistant Stainless Steel Fasteners: Bolts, Screws and Studs
Stainless bolts are classed by steel group (A2 = 304 family, A4 = 316 family) and strength (50, 70, 80).
What it covers
- Austenitic groups A1 to A5 and property classes 50, 70 and 80
- Bolts, screws and studs, M1.6 up
Minimum mechanical properties (austenitic)
| Grade | Tensile (min) | Yield (min) | Notes |
|---|---|---|---|
| A2-50 / A4-50 | 500 MPa73 ksi | 210 MPa30 ksi | Soft condition. |
| A2-70 / A4-70 | 700 MPa102 ksi | 450 MPa65 ksi | Cold worked; the usual choice. |
| A2-80 / A4-80 | 800 MPa116 ksi | 600 MPa87 ksi | Strain hardened. Hard to achieve at larger diameters; ask before specifying. |
ISO publishes SI values only. The inch-pound figures are conversions.
Notes for specifiers
- The first number is a tenth of the minimum tensile strength: A4-70 is at least 700 MPa.
- A2 (304) suits general atmospheric exposure. A4 (316), with molybdenum, is the choice for marine and chloride exposure.
- Stainless fasteners gall. Lubricate threads and avoid running nuts down at speed; stainless nuts should be the same group as the bolt.
- Strength falls well below carbon-steel 8.8 bolts: do not substitute stainless for a high-strength bolt without redesigning the joint.
Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.