Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Technical resources · Calculator

Bolt length (grip) calculator

Work out the bolt length to order from the thickness of the connected plies, the washers and nut, and the threads that should show beyond the nut.

mm
Order length82.5mm under head
Before rounding82.1mm
Min. thread length27.5mm
Show the build-up
  1. Grip 50.8 mm
  2. Washer under head 3.78 mm + washer under nut 3.78 mm
  3. Nut 18.65 mm
  4. Projection for 2 threads 5.08 mm
  5. Total 82.1 mm, rounded up to the next stock length: 82.55 mm
  6. Standard thread length for that bolt: 44.45 mm. The thread must be at least 27.52 mm to cover washer, nut and projection.

Inch-series bolts (UNC). Washer and nut thicknesses are nominal ASME values. Check the project specification for the minimum thread projection, and add allowance for coatings, paint or non-parallel flanges where the detail needs it.

Need it supplied or checked?

Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.