Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Technical resources · Calculator

Bolt strength calculator (AISC 360 / Eurocode 3)

Tension and shear resistance of one bolt, by the US (AISC 360 Chapter J) or European (EN 1993-1-8) method. Add your design forces for a pass/fail check.

1.25 unless the national annex says otherwise.

Design forces per bolt (optional) · kN

Ft,Rd tension141.0kN
Fv,Rd shear (one plane)94.0kN
Show the numbers
  1. fub = 800 MPa; As = 244.8 mm²; A = 314.2 mm²
  2. Ft,Rd = 0.9 · fub · As / γM2 = 141.0 kN
  3. αv = 0.6; Fv,Rd = αv · fub · As / γM2 = 94.0 kN

A screening aid for individual bolt strength only. It does not check bearing, block shear, prying, slip resistance, or the connected parts, and it does not replace the connection design by the engineer of record. Confirm all nominal stresses against the code edition in force.

Need it supplied or checked?

Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.