Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Carbon & structural steel

A572 Grade 50 high-strength low-alloy steel

A higher-yield structural plate, used where a thinner base plate or higher bearing capacity is wanted.

Ask about supply

A572 Grade 50 high-strength low-alloy steel

Designations

ASTM
A572 / A572M Grade 50 (345)
UNS
K02303 (Gr 50)
EN equivalent
Roughly S355

Chemical composition (weight %)

ElementLimit
Carbon (C)≤ 0.23
Manganese (Mn)≤ 1.35
Phosphorus (P)≤ 0.04
Sulfur (S)≤ 0.05
Silicon (Si)≤ 0.40
Columbium / vanadiummicro-alloy additions
Iron (Fe)balance

Mechanical properties (minimum)

ConditionTensileYieldElong. %RA %
PlateElongation in 2 in.; 18 % in 8 in.450 MPa65 ksi345 MPa50 ksi21—

Physical properties (typical)

PropertySIInch-pound
Density7.85 g/cm³0.284 lb/in³
Modulus of elasticity200 GPa29,000 ksi
Thermal expansion11.7 × 10⁻⁶ /°C6.5 × 10⁻⁶ /°F

Durability

  • Behaves like A36 for corrosion; protect by galvanizing or coating.

Cautions

  • Confirm the project specification; many designs assume A36 plate.

Composition ranges are specification limits and physical properties are typical room-temperature values. Confirm against the governing specification and the mill certificate for the heat supplied.

Need this material supplied?

Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.