Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Stainless steel

Type 316 austenitic stainless steel

304 with molybdenum added for chloride resistance. The usual stainless choice for marine and coastal fastening.

Ask about supply

Type 316 austenitic stainless steel

Designations

ASTM
A193 B8M; A194 Grade 8M; F593 / F594
ISO 3506
A4-50 / -70 / -80
UNS
S31600
EN
1.4401 (X5CrNiMo17-12-2)

Chemical composition (weight %)

ElementLimit
Chromium (Cr)16.0 – 18.0
Nickel (Ni)10.0 – 14.0
Molybdenum (Mo)2.0 – 3.0
Carbon (C)≤ 0.08
Manganese (Mn)≤ 2.00
Silicon (Si)≤ 1.00
Phosphorus (P)≤ 0.045
Sulfur (S)≤ 0.030
Iron (Fe)balance

Mechanical properties (minimum)

ConditionTensileYieldElong. %RA %
A193 B8M Class 1 (solution treated)515 MPa75 ksi205 MPa30 ksi3050
ISO 3506 A4-70 (cold worked)Elongation depends on diameter; see ISO 3506-1.700 MPa102 ksi450 MPa65 ksi——

Physical properties (typical)

PropertySIInch-pound
Density8.00 g/cm³0.289 lb/in³
Modulus of elasticity193 GPa28,000 ksi
Thermal expansion15.9 × 10⁻⁶ /°C8.8 × 10⁻⁶ /°F
Thermal conductivity16.3 W/m·K9.4 Btu/h·ft·°F

Durability

  • PREN about 24: much better than 304 in chlorides, but still susceptible to crevice and pitting corrosion in warm seawater.
  • For splash zones and permanently submerged bolting, consider duplex stainless.

Cautions

  • Galling risk as for 304.
  • Strength is low compared with 8.8 / A325: do not substitute without checking the joint design.

Composition ranges are specification limits and physical properties are typical room-temperature values. Confirm against the governing specification and the mill certificate for the heat supplied.

Need this material supplied?

Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.