Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Stainless steel

Type 304 austenitic stainless steel

The general-purpose stainless: good in clean atmospheres, poor in chlorides. Fasteners are A193 B8 or ISO A2.

Ask about supply

Type 304 austenitic stainless steel

Designations

ASTM
A193 B8; A194 Grade 8; F593 / F594
ISO 3506
A2-50 / -70 / -80
UNS
S30400
EN
1.4301 (X5CrNi18-10)

Chemical composition (weight %)

ElementLimit
Chromium (Cr)18.0 – 20.0
Nickel (Ni)8.0 – 10.5
Carbon (C)≤ 0.08
Manganese (Mn)≤ 2.00
Silicon (Si)≤ 1.00
Phosphorus (P)≤ 0.045
Sulfur (S)≤ 0.030
Nitrogen (N)≤ 0.10
Iron (Fe)balance

Mechanical properties (minimum)

ConditionTensileYieldElong. %RA %
A193 B8 Class 1 (solution treated)515 MPa75 ksi205 MPa30 ksi3050
ISO 3506 A2-70 (cold worked)Elongation depends on diameter; see ISO 3506-1.700 MPa102 ksi450 MPa65 ksi——

Physical properties (typical)

PropertySIInch-pound
Density8.00 g/cm³0.289 lb/in³
Modulus of elasticity193 GPa28,000 ksi
Thermal expansion17.2 × 10⁻⁶ /°C9.6 × 10⁻⁶ /°F
Thermal conductivity16.2 W/m·K9.4 Btu/h·ft·°F

Durability

  • Pitting resistance equivalent (PREN) about 19: adequate for clean inland atmospheres, not for coastal, de-icing salt or chloride process exposure.
  • Non-magnetic when annealed; becomes slightly magnetic when cold worked.

Cautions

  • Galling: lubricate threads and tighten slowly.
  • Contact with carbon or galvanized steel in wet conditions creates a galvanic couple.

Composition ranges are specification limits and physical properties are typical room-temperature values. Confirm against the governing specification and the mill certificate for the heat supplied.

Need this material supplied?

Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.