Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Stainless steel

2205 duplex stainless steel

Roughly twice the yield strength of 316 with better chloride and stress-corrosion resistance. For severe marine and chemical exposure.

Ask about supply

2205 duplex stainless steel

Designations

ASTM
A276 / A479 S32205 (S31803); A193 B8-series by agreement
UNS
S32205 / S31803
EN
1.4462 (X2CrNiMoN22-5-3)

Chemical composition (weight %)

ElementLimit
Chromium (Cr)22.0 – 23.0
Nickel (Ni)4.5 – 6.5
Molybdenum (Mo)3.0 – 3.5
Nitrogen (N)0.14 – 0.20
Carbon (C)≤ 0.030
Manganese (Mn)≤ 2.00
Silicon (Si)≤ 1.00
Phosphorus (P)≤ 0.030
Sulfur (S)≤ 0.020
Iron (Fe)balance

Mechanical properties (minimum)

ConditionTensileYieldElong. %RA %
Bar, annealed (A276 S32205)655 MPa95 ksi450 MPa65 ksi25—

Physical properties (typical)

PropertySIInch-pound
Density7.80 g/cm³0.282 lb/in³
Modulus of elasticity200 GPa29,000 ksi
Thermal expansion13.0 × 10⁻⁶ /°C7.2 × 10⁻⁶ /°F
Thermal conductivity19 W/m·K11 Btu/h·ft·°F

Durability

  • PREN about 35: good resistance to pitting, crevice and chloride stress-corrosion cracking.
  • Not recommended above about 600 °F (315 °C) continuous service because of embrittlement.

Cautions

  • Lead times and cost are well above 316: confirm the exposure really needs it.
  • Matching nuts and washers must also be duplex to avoid a weak link.

Composition ranges are specification limits and physical properties are typical room-temperature values. Confirm against the governing specification and the mill certificate for the heat supplied.

Need this material supplied?

Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.