Materials
The carbon, alloy, weathering and stainless steels that fasteners and base plates are made from: composition, mechanical and physical properties, and where each belongs.
Carbon & structural steel
A36 carbon structural steel
The default plate and bar steel for base plates, plate washers and fabricated brackets. Mild, weldable and inexpensive.
OpenA572 / A572M Grade 50 (345)A572 Grade 50 high-strength low-alloy steel
A higher-yield structural plate, used where a thinner base plate or higher bearing capacity is wanted.
OpenStainless steel
Type 304 austenitic stainless steel
The general-purpose stainless: good in clean atmospheres, poor in chlorides. Fasteners are A193 B8 or ISO A2.
OpenA193 B8M; A194 Grade 8M; F593 / F594Type 316 austenitic stainless steel
304 with molybdenum added for chloride resistance. The usual stainless choice for marine and coastal fastening.
OpenA276 / A479 S32205 (S31803); A193 B8-series by agreement2205 duplex stainless steel
Roughly twice the yield strength of 316 with better chloride and stress-corrosion resistance. For severe marine and chemical exposure.
OpenComposition ranges are specification limits; physical properties are typical room-temperature values. Confirm against the specification and the mill certificate for the heat supplied.
Need a specific alloy or heat certificate?
Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.