26 standards documented
Standards
ASTM, ASME, AASHTO, SAE, ISO and EN standards for bolts, rods, nuts, washers and coatings, with grade properties in ksi and MPa and the hardware that goes with each.
ASTMF1554Anchor Bolts, Steel, 36, 55 and 105 ksi Yield StrengthBolts & rods · 3 grade rowsASTMA307Carbon Steel Bolts, Studs and Threaded Rod, 60,000 psi Tensile StrengthBolts & rods · 2 grade rowsASTMF3125High Strength Structural Bolts, Steel and Alloy Steel, 120 ksi and 150 ksi Minimum Tensile StrengthBolts & rods · 3 grade rowsASTMA449Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile StrengthBolts & rods · 3 grade rowsASTMA354Quenched and Tempered Alloy Steel Bolts, Studs and Other Externally Threaded FastenersBolts & rods · 2 grade rowsASTMA193 / A193MAlloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure ServiceBolts & rods · 6 grade rowsASTMA320 / A320MAlloy-Steel and Stainless Steel Bolting for Low-Temperature ServiceBolts & rods · 1 grade rowsSAEJ429 / J995Mechanical and Material Requirements for Externally Threaded Fasteners (J429) and Nuts (J995)Bolts & rods · 5 grade rowsASTMA563 / A563MCarbon and Alloy Steel NutsNutsASTMA194 / A194MCarbon, Alloy and Martensitic Stainless Steel Nuts for High-Pressure or High-Temperature ServiceNutsISO898-2Mechanical Properties of Fasteners: Nuts with Specified Property ClassesNutsASTMF436 / F436MHardened Steel WashersWashersASTMF844Washers, Steel, Plain (Flat), Unhardened for General UseWashersASTMF959 / F959MCompressible-Washer-Type Direct Tension Indicators for Use with Structural FastenersWashersASMEB18.22.1Plain WashersWashersASTMA153 / F2329Zinc Coating (Hot-Dip) on Iron and Steel Hardware, and on Threaded FastenersCoatingsASTMA36 / A36MCarbon Structural SteelSteel & bar · 1 grade rowsASTMA615 / A615MDeformed and Plain Carbon-Steel Bars for Concrete ReinforcementSteel & bar · 4 grade rowsASMEB18.2.1 / B18.2.6Square, Hex, Heavy Hex and Askew Head Bolts (B18.2.1) and Fasteners for Use in Structural Applications (B18.2.6)Dimensions & threadsASMEB18.2.2Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange and Coupling NutsDimensions & threadsASMEB1.1Unified Inch Screw Threads (UN and UNR Thread Form)Dimensions & threadsISO898-1Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel: Bolts, Screws and Studs with Specified Property ClassesBolts & rods · 10 grade rowsISO3506-1Corrosion-Resistant Stainless Steel Fasteners: Bolts, Screws and StudsBolts & rods · 3 grade rowsISO4014 / 4032 / 7089Metric Hexagon Head Bolts (4014), Hexagon Nuts (4032) and Plain Washers (7089)Dimensions & threadsEN14399 / 15048High-Strength Structural Bolting Assemblies for Preloading (EN 14399) and Non-Preloaded Structural Bolting (EN 15048)Bolts & rodsAASHTOM-seriesAASHTO Material Specifications for Highway Bolting and HardwareCross-reference
Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.
A standard that is not listed?
Tell us the number and the project. If it can be supplied we will say so; if it cannot, we will say that too.