Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Washers

ASME B18.22.1

Plain Washers

ASME B18.22.1: Plain Washers

Inch dimensions for plain flat washers, including the wide USS and narrow SAE series.

What it covers

  • Plain washers, 1/4 in. and up
  • Type A (preferred) and Type B series
Standard (USS wide) flat washers, nominal dimensions
For boltInside dia.Outside dia.Thickness
6.35 mm7.14 mm18.64 mm1.65 mm
7.94 mm8.74 mm22.22 mm2.11 mm
9.52 mm10.31 mm25.4 mm2.11 mm
11.11 mm11.91 mm28.58 mm2.11 mm
12.7 mm13.49 mm31.75 mm2.77 mm
14.29 mm15.09 mm37.31 mm2.77 mm
15.88 mm16.66 mm44.45 mm3.4 mm
19.05 mm20.62 mm50.8 mm3.76 mm
22.22 mm23.83 mm57.15 mm4.19 mm
25.4 mm26.97 mm63.5 mm4.19 mm
28.58 mm31.75 mm69.85 mm4.19 mm
31.75 mm34.93 mm76.2 mm4.19 mm
34.93 mm38.1 mm82.55 mm4.57 mm
38.1 mm41.28 mm88.9 mm4.57 mm

Nominal values used by the weight calculator. Confirm against the current standard for tolerance and series.

Notes for specifiers

  • These are the dimensions the bolt weight calculator uses for standard washers.

Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.

Specifying this and want it checked?

Send the clause or the drawing note. We will confirm what it requires and whether we can supply it.