Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Washers

ASTM F436 / F436M

Hardened Steel Washers

ASTM F436 / F436M: Hardened Steel Washers

Through-hardened washers for structural bolting. They spread the load and give a consistent surface to turn the nut against.

What it covers

  • Type 1 (carbon steel) and Type 3 (weathering steel)
  • Round, square-beveled and clipped styles
  • Hardness HRC 38 – 45
Round hardened washers, nominal dimensions
For boltInside dia.Outside dia.Thickness
12.7 mm14.29 mm26.99 mm3.45 mm
15.88 mm17.46 mm33.34 mm3.78 mm
19.05 mm20.64 mm37.31 mm3.78 mm
22.22 mm23.81 mm44.45 mm3.96 mm
25.4 mm28.58 mm50.8 mm3.96 mm
28.58 mm31.75 mm57.15 mm3.96 mm
31.75 mm34.93 mm63.5 mm3.96 mm
34.93 mm38.1 mm69.85 mm3.96 mm
38.1 mm41.28 mm76.2 mm3.96 mm

Nominal values. Tolerances apply; confirm against the current standard.

Notes for specifiers

  • Hardened washers are required where the specification calls for them: under the turned element on A490 bolts, and for slotted or oversized holes.
  • Hot-dip galvanized washers keep the zinc coating; do not mix plain washers into a galvanized assembly.
  • A DTI washer (F959) replaces or supplements the hardened washer under the bolt head in some joints.

Example specification wording

Washers: ASTM F436 Type 1 round hardened, hot-dip galvanized to ASTM F2329.

Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.

Specifying this and want it checked?

Send the clause or the drawing note. We will confirm what it requires and whether we can supply it.