ISO 4014 / 4032 / 7089: Metric Hexagon Head Bolts (4014), Hexagon Nuts (4032) and Plain Washers (7089)
The everyday metric bolt, nut and washer dimensions. DIN 931, 934 and 125 are the older equivalents that still appear on drawings.
What it covers
- ISO 4014: hex head bolts (partly threaded), product grades A and B
- ISO 4032: hex nuts, style 1
- ISO 7089: plain washers, normal series, grade A
| Thread | Pitch | Across flats s | Bolt head height k | Nut thickness m |
|---|---|---|---|---|
| 6 | 1 | 10 mm | 4 mm | 5.2 mm |
| 8 | 1.25 | 13 mm | 5.3 mm | 6.8 mm |
| 10 | 1.5 | 16 mm | 6.4 mm | 8.4 mm |
| 12 | 1.75 | 18 mm | 7.5 mm | 10.8 mm |
| 16 | 2 | 24 mm | 10 mm | 14.8 mm |
| 20 | 2.5 | 30 mm | 12.5 mm | 18 mm |
| 24 | 3 | 36 mm | 15 mm | 21.5 mm |
| 30 | 3.5 | 46 mm | 18.7 mm | 25.6 mm |
| 36 | 4 | 55 mm | 22.5 mm | 31 mm |
| 42 | 4.5 | 65 mm | 26 mm | 34 mm |
| 48 | 5 | 75 mm | 30 mm | 38 mm |
Nominal (maximum) values for preferred sizes. The thread column is the diameter in mm (M6, M8 …) and the pitch is the coarse pitch.
| For thread | Inside dia. d1 | Outside dia. d2 | Thickness h |
|---|---|---|---|
| 6 | 6.4 mm | 12 mm | 1.6 mm |
| 8 | 8.4 mm | 16 mm | 1.6 mm |
| 10 | 10.5 mm | 20 mm | 2 mm |
| 12 | 13 mm | 24 mm | 2.5 mm |
| 16 | 17 mm | 30 mm | 3 mm |
| 20 | 21 mm | 37 mm | 3 mm |
| 24 | 25 mm | 44 mm | 4 mm |
| 30 | 31 mm | 56 mm | 4 mm |
| 36 | 37 mm | 66 mm | 5 mm |
| 42 | 45 mm | 78 mm | 8 mm |
| 48 | 52 mm | 92 mm | 8 mm |
Nominal values for preferred sizes.
Notes for specifiers
- ISO 4014 across-flats are smaller than the old DIN 931 for M10, M12 and M14 (16 / 18 / 21 mm instead of 17 / 19 / 22 mm). Check the socket size when mixing ISO and DIN stock.
- ISO 4017 is the fully threaded version of ISO 4014 (DIN 933).
Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.