Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Nuts

ISO 898-2

Mechanical Properties of Fasteners: Nuts with Specified Property Classes

ISO 898-2: Mechanical Properties of Fasteners: Nuts with Specified Property Classes

Metric nuts are classed by the highest bolt class they can carry: a class 8 nut for 8.8 bolts, class 10 for 10.9, class 12 for 12.9.

What it covers

  • Nut property classes 04 – 12 (coarse thread, style 1 and style 2)
  • Proof stress as the design basis
Bolt class and the nut that goes with it
Bolt property classNut property class
4.6, 4.84 or 5
5.6, 5.85
6.86
8.88 (or 9)
9.89
10.910
12.912

Notes for specifiers

  • A nut of the matching class, or higher, can be tightened until the bolt yields or fractures rather than stripping the thread.
  • Hot-dip galvanized metric nuts are tapped oversize in the same way as inch nuts.

Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.

Specifying this and want it checked?

Send the clause or the drawing note. We will confirm what it requires and whether we can supply it.