Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Reference data

ISO metric threads

Coarse and fine series, M6 to M64. Every value follows from the diameter and the pitch by the ISO 724 basic-profile formulas, so the table and the formulas can be checked against each other.

ISO metric threads

Coarse series (ISO 261)

Coarse series (ISO 261)
DesignationNominal Ø (in)Pitch P (mm)Pitch dia. d2 (mm)Minor dia. d3 (mm)Internal minor D1 (mm)Thread depth h3 (mm)Stress area As (mm²)Tap drill ≈ d−P (mm)
M60.23615.3514.7734.9180.61320.15.00
M80.3151.257.1886.4666.6470.76736.66.75
M100.3941.59.0268.1608.3760.92058.08.50
M120.4721.7510.8639.85310.1061.07384.310.25
M140.551212.70111.54611.8351.227115.412.00
M160.630214.70113.54613.8351.227156.714.00
M180.7092.516.37614.93315.2941.533192.515.50
M200.7872.518.37616.93317.2941.533244.817.50
M220.8662.520.37618.93319.2941.533303.419.50
M240.945322.05220.31920.7531.840352.521.00
M271.063325.05223.31923.7531.840459.424.00
M301.1813.527.72725.70626.2112.147560.626.50
M331.2993.530.72728.70629.2112.147693.629.50
M361.417433.40231.09231.6702.454816.732.00
M391.535436.40234.09234.6702.454975.835.00
M421.6544.539.07736.47937.1292.7601120.937.50
M451.7724.542.07739.47940.1292.7601306.040.50
M481.890544.75241.86542.5873.0671473.143.00
M522.047548.75245.86546.5873.0671757.847.00
M562.2055.552.42849.25250.0463.3742030.050.50
M602.3625.556.42853.25254.0463.3742362.054.50
M642.520660.10356.63957.5053.6802676.058.00

Fine series: the common pitch for each diameter

Fine series: the common pitch for each diameter
DesignationNominal Ø (in)Pitch P (mm)Pitch dia. d2 (mm)Minor dia. d3 (mm)Internal minor D1 (mm)Thread depth h3 (mm)Stress area As (mm²)Tap drill ≈ d−P (mm)
M8×10.31517.3516.7736.9180.61339.27.00
M10×1.250.3941.259.1888.4668.6470.76761.28.75
M12×1.50.4721.511.02610.16010.3760.92088.110.50
M14×1.50.5511.513.02612.16012.3760.920124.512.50
M16×1.50.6301.515.02614.16014.3760.920167.214.50
M18×1.50.7091.517.02616.16016.3760.920216.216.50
M20×1.50.7871.519.02618.16018.3760.920271.518.50
M22×1.50.8661.521.02620.16020.3760.920333.120.50
M24×20.945222.70121.54621.8351.227384.422.00
M27×21.063225.70124.54624.8351.227495.725.00
M30×21.181228.70127.54627.8351.227621.228.00
M33×21.299231.70130.54630.8351.227760.831.00
M36×31.417334.05132.31932.7521.840864.933.00
M39×31.535337.05135.31935.7521.8401028.436.00
M42×31.654340.05138.31938.7521.8401206.039.00
M45×31.772343.05141.31941.7521.8401397.742.00
M48×31.890346.05144.31944.7521.8401603.645.00
M52×42.047449.40247.09247.6702.4541828.248.00
M56×42.205453.40251.09251.6702.4542144.052.00
M60×42.362457.40255.09255.6702.4542484.856.00
M64×42.520461.40259.09259.6702.4542850.860.00

How to read a designation

  • M20: metric thread, 20 mm nominal diameter, coarse pitch (2.5 mm). Coarse is assumed when no pitch is written.
  • M20×1.5: the same diameter in a fine pitch of 1.5 mm. Fine threads have a larger stress area and resist loosening better, but are easier to strip and damage.
  • d2, d3, D1: pitch diameter, external minor diameter and internal minor diameter. As is the tensile stress area that strength is calculated on.

Formulas

  • Pitch diameter d2 = d − 0.6495 P
  • External minor diameter d3 = d − 1.2269 P; internal minor diameter D1 = d − 1.0825 P
  • Thread depth h3 = 0.6134 P
  • Stress area As = (π/4)(d − 0.9382 P)²

Related: ISO 898-1 property classes, torque and preload calculator, UNC / UNF / 8-UN thread data and the unit converter.

Values are computed from the ISO 724 basic profile. Tolerance classes (for example 6g external, 6H internal) are defined in ISO 965 and are not tabulated here: confirm them against the standard. The tap drill is the usual shop rule, d − P, and is approximate.

Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.

Ready to get a quotation?

Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.