EN 14399 / 15048: High-Strength Structural Bolting Assemblies for Preloading (EN 14399) and Non-Preloaded Structural Bolting (EN 15048)
The European structural bolting standards that sit under Eurocode 3 and EN 1090 execution rules.
What it covers
- EN 14399: HR and HV preloaded assemblies, property classes 8.8 and 10.9
- EN 15048: non-preloaded bolting assemblies, classes 4.6 to 10.9
- Sets of bolt, nut and washer sold and tested together
| System | Bolt / nut classes | Notes |
|---|---|---|
| HR (EN 14399-3) | 8.8 / 8 or 10.9 / 10 | Bolts and nuts assembled as a set; K-class lubrication |
| HV (EN 14399-4) | 10.9 / 10 | Nuts with a deeper thread engagement for higher resistance to stripping |
Notes for specifiers
- Preloaded assemblies are supplied and certified as a set. Do not mix bolts, nuts and washers from different lots or manufacturers.
- Design to EN 1993-1-8 (Eurocode 3, Part 1-8). The bolt capacity calculator in the technical resources uses its resistance formulas.
- Execution, tightening methods and inspection follow EN 1090-2.
Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.