Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Technical resources · Calculator

Anchor rod steel strength (ACI 318)

Steel tension and shear strength of a cast-in headed or hooked anchor rod, with the ductility check ACI 318 uses to classify the steel.

φNsa tension151.6kN
φVsa shear78.8kN
Ase (stress area)391mm²

Ductile steel element: 21 % elongation, 30 % reduction of area, so the φ factors above apply.

Show the numbers
  1. Ase,N = 391 mm² (UNC threads per inch)
  2. futa = min(specified Fu 517 MPa, 1.9 fya 721 MPa, 862 MPa) = 517 MPa
  3. Nsa = Ase · futa = 202.1 kN; φNsa = 0.75 · Nsa = 151.6 kN
  4. Vsa = 0.6 · Ase · futa = 121.3 kN; φVsa = 0.65 · Vsa = 78.8 kN

Steel strength only. Concrete breakout, pullout, side-face blowout, pryout, edge distance, spacing and seismic provisions are separate checks under ACI 318 Chapter 17 (or AISC Design Guide 1 for column bases) and are NOT covered here. This is a screening aid, not a design.

Need it supplied or checked?

Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.