Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Weathering steel

Weathering steel (A588 / A709 Grade 50W)

Steel that forms a stable rust patina in alternating wet and dry conditions, used for bridges and exposed architectural steel without paint.

Ask about supply

Weathering steel (A588 / A709 Grade 50W)

Designations

ASTM
A588 / A588M; A709 Grade 50W
Fasteners
F3125 Type 3; A563 Grade DH3; F436 Type 3

Chemical composition (weight %)

ElementLimit
Carbon (C)≤ 0.19 (A588 Grade A)
Manganese (Mn)0.80 – 1.25
Silicon (Si)0.30 – 0.65
Chromium (Cr)0.40 – 0.65
Copper (Cu)0.25 – 0.40
Nickel (Ni)≤ 0.40
Vanadium (V)0.02 – 0.10
Iron (Fe)balance

A588 Grade A shown; other grades vary.

Mechanical properties (minimum)

ConditionTensileYieldElong. %RA %
Plate to 4 in.Elongation in 2 in.; 18 % in 8 in.485 MPa70 ksi345 MPa50 ksi21—

Physical properties (typical)

PropertySIInch-pound
Density7.85 g/cm³0.284 lb/in³
Modulus of elasticity200 GPa29,000 ksi
Thermal expansion11.7 × 10⁻⁶ /°C6.5 × 10⁻⁶ /°F

Durability

  • The patina needs wet-dry cycling. It performs poorly under continuous wetness, buried conditions, or heavy chloride exposure such as de-icing salt spray and marine splash zones.
  • Bolts, nuts and washers should be Type 3 so they weather with the member; do not galvanize them for a weathered finish.

Cautions

  • Rust staining of adjacent concrete is normal during early weathering: detail drainage and protection.
  • Mixing galvanized and weathering steel in a joint creates a galvanic couple.

Composition ranges are specification limits and physical properties are typical room-temperature values. Confirm against the governing specification and the mill certificate for the heat supplied.

Need this material supplied?

Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.