Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Washers

ASTM F959 / F959M

Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

ASTM F959 / F959M: Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

A washer with raised protrusions that flatten as the bolt is tightened, so the installed pretension can be checked with a feeler gauge.

What it covers

  • Types 325 and 490 DTIs
  • Plain, mechanically galvanized or other finishes
  • Inch and metric versions

Notes for specifiers

  • A DTI is a verification device, not a lubricant or a nut. Orientation (protrusions toward the head or toward a hardened washer) follows the RCSC Specification.
  • Gap acceptance and the feeler-gauge procedure are in the RCSC Specification; follow the edition the project cites.
  • Galvanized bolts take DTIs of the matching coating type; check the compatible finishes on the order.

Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.

Specifying this and want it checked?

Send the clause or the drawing note. We will confirm what it requires and whether we can supply it.