Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Dimensions & threads

ASME B18.2.2

Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange and Coupling Nuts

ASME B18.2.2: Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange and Coupling Nuts

Inch nut dimensions: width across flats and thickness for hex and heavy hex nuts.

What it covers

  • Hex and heavy hex nuts
  • Jam nuts, square nuts and coupling nuts
Hex nuts, nominal dimensions
Nominal sizeWidth across flats FThickness
6.35 mm11.11 mm5.56 mm
7.94 mm12.7 mm6.75 mm
9.52 mm14.29 mm8.33 mm
11.11 mm17.46 mm9.52 mm
12.7 mm19.05 mm11.11 mm
14.29 mm22.22 mm12.3 mm
15.88 mm23.81 mm13.89 mm
19.05 mm28.58 mm16.27 mm
22.22 mm33.34 mm19.05 mm
25.4 mm38.1 mm21.83 mm
28.58 mm42.86 mm24.61 mm
31.75 mm47.63 mm26.99 mm
34.93 mm52.39 mm29.77 mm
38.1 mm57.15 mm32.55 mm

Nominal (basic) values; tolerances apply.

Heavy hex nuts, nominal dimensions
Nominal sizeWidth across flats FThickness
12.7 mm22.22 mm12.3 mm
15.88 mm26.99 mm15.48 mm
19.05 mm31.75 mm18.65 mm
22.22 mm36.51 mm21.83 mm
25.4 mm41.28 mm25 mm
28.58 mm46.04 mm28.18 mm
31.75 mm50.8 mm31.35 mm
34.93 mm55.56 mm34.53 mm
38.1 mm60.32 mm37.7 mm

Nominal (basic) values; tolerances apply.

Notes for specifiers

  • Heavy hex nut thickness is the nominal diameter less 1/64 in.
  • Galvanized nuts are tapped oversize; their thickness and across-flats are unchanged.

Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.

Specifying this and want it checked?

Send the clause or the drawing note. We will confirm what it requires and whether we can supply it.