ASTM A615 / A615M: Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
The standard reinforcing bar, graded by yield strength. Threaded rebar is a common form of high-strength tie-down.
What it covers
- Deformed bars #3 to #18 (soft-metric 10 – 57)
- Grades 40, 60, 75 and 80 (metric 280, 420, 520, 550)
Mechanical requirements
| Grade | Tensile (min) | Yield (min) |
|---|---|---|
| Grade 40 (280) | 420 MPa70 ksi | 280 MPa40 ksi |
| Grade 60 (420) | 620 MPa90 ksi | 420 MPa60 ksi |
| Grade 75 (520) | 690 MPa100 ksi | 520 MPa75 ksi |
| Grade 80 (550) | 725 MPa105 ksi | 550 MPa80 ksi |
A615M publishes metric grades; the SI values below are the standard's grade designations and tensile minimums.
Notes for specifiers
- Elongation requirements vary by bar size; consult the standard.
- Weldability is not guaranteed by A615. Use A706 for bars that will be welded.
Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.