Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Steel & bar

ASTM A36 / A36M

Carbon Structural Steel

ASTM A36 / A36M: Carbon Structural Steel

The standard structural carbon steel for plate, shapes and bar. The usual specification for base plates, plate washers and cut fabrications.

What it covers

  • Plate, shapes, sheet piling and bar
  • 36 ksi (250 MPa) minimum yield

Mechanical requirements

GradeTensile (min – max)Yield (min)Elong. % minNotes
A36400 – 550 MPa58 – 80 ksi250 MPa36 ksi20Elongation 20 % in 8 in. (200 mm); 23 % in 2 in. (50 mm) for plate and bar.

A36M publishes SI values: yield 250 MPa, tensile 400 – 550 MPa.

Notes for specifiers

  • Base plates and plate washers are normally A36 unless the design calls for A572 Gr 50.
  • Plate for galvanizing should be checked for silicon content, which affects coating appearance and thickness.

Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.

Specifying this and want it checked?

Send the clause or the drawing note. We will confirm what it requires and whether we can supply it.