Technical resources: 26 standards · 9 calculators · metric & imperial
Contact
Bolts & rods

ASTM A354

Quenched and Tempered Alloy Steel Bolts, Studs and Other Externally Threaded Fasteners

ASTM A354: Quenched and Tempered Alloy Steel Bolts, Studs and Other Externally Threaded Fasteners

Alloy-steel bolting in grades BC (125 ksi) and BD (150 ksi), for general high-strength use and where A490-class strength is wanted in non-structural forms.

What it covers

  • Grades BC and BD
  • Bolts, studs and threaded rod, 1/4 in. to 4 in.
  • Q&T alloy steel

Mechanical requirements (to 2-1/2 in.)

GradeSizeTensile (min)Yield (min)Elong. % minRA % min
Grade BC1/4 – 2-1/2 in.862 MPa125 ksi752 MPa109 ksi1650
Grade BD1/4 – 2-1/2 in.1,034 MPa150 ksi896 MPa130 ksi1440

Metric values are direct conversions.

Matching hardware and finishing

Nut
ASTM A563 Grade DH (BD), Grade C or DH (BC)
Washer
ASTM F436 hardened

Notes for specifiers

  • Grade BD has A490-level strength. Like A490, treat hot-dip galvanizing with caution and ask before specifying it.
  • Larger diameters carry lower strength; the figures above apply to sizes up to 2-1/2 in.

Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.

Specifying this and want it checked?

Send the clause or the drawing note. We will confirm what it requires and whether we can supply it.