Rod weight chart
Weight per unit length of plain round carbon-steel rod, for inch and metric diameters.
Rod weight chart
| Diameter | kg per metre | kg per 6 m length |
|---|---|---|
| 6.35 mm (1/4") | 0.248 | 1.5 |
| 9.52 mm (3/8") | 0.559 | 3.4 |
| 12.7 mm (1/2") | 0.993 | 6 |
| 15.88 mm (5/8") | 1.552 | 9.3 |
| 19.05 mm (3/4") | 2.235 | 13.4 |
| 22.22 mm (7/8") | 3.042 | 18.3 |
| 25.4 mm (1") | 3.973 | 23.8 |
| 28.58 mm (1-1/8") | 5.029 | 30.2 |
| 31.75 mm (1-1/4") | 6.208 | 37.3 |
| 34.93 mm (1-3/8") | 7.512 | 45.1 |
| 38.1 mm (1-1/2") | 8.94 | 53.6 |
| 44.45 mm (1-3/4") | 12.169 | 73 |
| 50.8 mm (2") | 15.894 | 95.4 |
| 57.15 mm (2-1/4") | 20.115 | 120.7 |
| 63.5 mm (2-1/2") | 24.834 | 149 |
| 69.85 mm (2-3/4") | 30.049 | 180.3 |
| 76.2 mm (3") | 35.761 | 214.6 |
| 88.9 mm (3-1/2") | 48.674 | 292 |
| 101.6 mm (4") | 63.574 | 381.4 |
| 114.3 mm (4-1/2") | 80.461 | 482.8 |
| 127 mm (5") | 99.335 | 596 |
| 152.4 mm (6") | 143.042 | 858.3 |
| Diameter | kg per metre | kg per 6 m length |
|---|---|---|
| 6 mm | 0.222 | 1.3 |
| 8 mm | 0.395 | 2.4 |
| 10 mm | 0.617 | 3.7 |
| 12 mm | 0.888 | 5.3 |
| 16 mm | 1.578 | 9.5 |
| 20 mm | 2.466 | 14.8 |
| 24 mm | 3.551 | 21.3 |
| 27 mm | 4.494 | 27 |
| 30 mm | 5.548 | 33.3 |
| 36 mm | 7.99 | 47.9 |
| 42 mm | 10.875 | 65.3 |
| 48 mm | 14.204 | 85.2 |
| 56 mm | 19.333 | 116 |
| 64 mm | 25.252 | 151.5 |
| 72 mm | 31.959 | 191.8 |
| 80 mm | 39.456 | 236.7 |
| 90 mm | 49.937 | 299.6 |
| 100 mm | 61.65 | 369.9 |
Plain round bar at the full nominal diameter: 0.2833 lb/in³ (7,850 kg/m³), so weight per foot = 2.67 × D² (D in inches) and weight per metre = 0.006165 × D² (D in mm). Threaded rod is lighter because the thread root is smaller; hot-dip galvanizing adds a few percent. Use the bolt weight calculator for finished pieces.
Prepared from the published tables of the standards named and cross-checked against secondary references. It is a working reference, not a substitute for the standard: confirm against the current edition before using it in design, specification or procurement.
Ready to get a quotation?
Build a list of products and quantities, or send a sketch or a drawing. Our sales team replies with a quotation.